Quick answer: Current aerospace Tech Pub listings in Bangalore ask for the same four things: knowledge of ATA 100, ATA iSpec 2200, S1000D and ASD-STE100; the ability to read engineering drawings; hands-on authoring and illustration tools such as Arbortext, FrameMaker and IsoDraw; and, for most roles beyond entry level, proof that you are already trained in Tech Pub. Fresher-friendly roles exist, but “trained” is usually the filter.
Open a job portal. Search “technical publications Bangalore.” Scroll for five minutes.
Half the listings say 2 to 3 years. A few say 0 to 2. Every single one throws acronyms at you like you were born knowing them.
So we sat down and read the listings, line by line. Here is what employers are really asking for, and what it means if you are a fresher.

What we looked at
We reviewed Tech Pub listings from October 2026 posted by Accenture (Industry X), Safran Engineering Services, Thales and Capgemini Engineering for Bangalore. Listings change, so treat this as a snapshot, not a promise. We are not saying these companies hire from any one institute. We are reading what they ask for.
Pattern 1: The standards show up everywhere
Almost every listing names the same standards.
- ATA iSpec 2200 and S1000D: the two big structures for aerospace manuals.
- ATA 100: the chapter system used to organise aircraft information.
- ASD-STE100 (Simplified Technical English): the writing rules that keep procedures clear.
If you only remember one thing from this post, remember this. These four names are the entry ticket.
Pattern 2: They want you to read drawings
Listings talk about interpreting engineering drawings, service bulletins, parts lists and change documents. A Tech Pub engineer does not invent a procedure. You read the engineering data and turn it into a clear step-by-step manual. If you cannot read a drawing, you cannot author.
Pattern 3: Tools are named, not hinted at
This surprised us. Listings do not say “good with software.” They name it:
- Arbortext Editor and Adobe FrameMaker for authoring
- IsoDraw and Adobe Illustrator for illustrations
- Oxygen XML Editor for structured content
- Windchill, Agile PLM and CATIA on the engineering data side
You do not need all of them on day one. But if you have worked in at least an authoring tool and an illustration tool, you stand out from the stack of fresh résumés.
Pattern 4: The experience ladder is clear
| Level | What listings typically ask |
|---|---|
| Entry (0 to 2 years) | BE in Mechanical/Aero or AME, understanding of iSpec 2200 and S1000D, drawing interpretation. Example: an AMM Author role at Accenture Industry X. |
| Trained plus experience (2 to 3 years) | “Trained in Aerospace Technical Publication” with iSpec 2200, S1000D, ASD-STE and SGML or FrameMaker. Example: Safran Engineering Services. |
| Lead and senior (4 to 8 years) | CMM or AMM authoring ownership, structured authoring, CSDB and team coordination. Examples: Capgemini Engineering and Thales. |
Look at the second row again. A Safran-style listing wants you to be trained before you apply. That is the gap a good Tech Pub programme closes.
What this means for freshers
- Do not wait for “2 years of experience” to start. Training is how you get your first line on the résumé.
- Learn the standards by name. If an interviewer says “iSpec 2200” and you freeze, that is the end of the round.
- Build something. A manual you wrote and validated beats a certificate you only downloaded.
- Check your stream. Many listings accept Mechanical or Aero degrees and AME. GLOINNT’s own training is open to BE/BTech in Aeronautical or Aerospace Engineering and AME (Mechanical or Avionics).
How the GLOINNT training lines up
We matched what the listings ask for with what you do in our 3-month programme.
- Standards: ATA 100, iSpec 2200, S1000D and ASD-STE100.
- Manuals: AMM, CMM, AIPC, SRM, WDM, Engine Manual, ITEM and Service Bulletins.
- Drawings: 2D and 3D drawings and BOM reading.
- Tools: Arbortext Editor for authoring and IsoDraw for illustrations.
- Validation: your manual is checked on a real aircraft.
- Assessment: a written test, a B2 level English test and an on-aircraft validation.
We give placement assistance in the aerospace domain. It is assistance, not a guarantee, and you still need to clear the interviews. Comparing options? Read how to choose a Tech Pub institute, aircraft technical manuals explained and which companies hire Tech Pub talent.
Ready to apply for the next batch?
Check eligibility, batch dates and how to apply first. Then fill in the form and our admissions team will call you with batch dates and fees.
Prefer to talk first? Call +91 96062 64161 (Monday to Friday, 9:00 AM to 6:00 PM) or write to info@gloinnt.com.
Quick FAQ
Can a fresher get a Tech Pub job in Bangalore?
Yes. Entry-level author roles exist, usually asking for a relevant degree and a working knowledge of the standards.
Which standards matter most?
ATA iSpec 2200, S1000D, ATA 100 and ASD-STE100 appear in almost every listing we read.
Do I need to know every tool before I apply?
No. Hands-on time in one authoring tool and one illustration tool is a strong start.
Is this a hiring guarantee from these companies?
No. We only read what these employers ask for in public listings.
