You open an aircraft maintenance manual for the first time. Every page starts with a number like 32 or 24 or 71. A senior says, “Check the 29 chapter.” Everyone nods. You nod too, and quietly open a search tab.
Those numbers are ATA chapters. They are the map of the aircraft. Once you can read the map, every manual, parts catalogue and job listing starts to make sense.
Quick answer: ATA chapter numbers are a standard numbering system that splits an aircraft into systems, so every manufacturer and airline can find the same information in the same place. For example, 24 is Electrical Power, 32 is Landing Gear, 29 is Hydraulic Power and 72 is the Engine. The old ATA 100 specification has been superseded by iSpec 2200, which keeps the same numbering approach.
What are ATA chapters?
ATA stands for the Air Transport Association. Its numbering system gives each aircraft system a two-digit chapter number. Chapters are then broken down further, so a full reference reads as chapter, section and subject. That is why a technical author can write a procedure in Bengaluru and an engineer on a hangar floor anywhere in the world can find it in seconds.
In 2000, the ATA committee created iSpec 2200 as a consolidated specification for the commercial aviation industry. It covers aircraft system numbering as well as the format and content of documentation, and it succeeded ATA 100. Many people still say “ATA 100” out of habit, so you will hear both terms.
The chapter groups, in plain language
- Chapters 05 to 12: General. Time limits and maintenance checks (05), dimensions (06), lifting and shoring (07), leveling and weighing (08), towing and taxiing (09), parking and storage (10), placards and markings (11), and servicing (12).
- Chapters 20 to 49: Aircraft systems. Everything that makes the aircraft work, from air conditioning to electrics to navigation.
- Chapters 50 to 57: Structure. Cargo compartments, doors, fuselage, nacelles and pylons, stabilizers, windows and wings.
- Chapters 70 to 80: Power plant. The engine and everything attached to it.
The chapters you will meet most as a fresher
| ATA chapter | System |
|---|---|
| 21 | Air Conditioning and Pressurization |
| 22 | Auto Flight |
| 23 | Communications |
| 24 | Electrical Power |
| 26 | Fire Protection |
| 27 | Flight Controls |
| 28 | Fuel |
| 29 | Hydraulic Power |
| 30 | Ice and Rain Protection |
| 31 | Indicating / Recording System |
| 32 | Landing Gear |
| 33 | Lights |
| 34 | Navigation |
| 35 | Oxygen |
| 36 | Pneumatic |
| 49 | Airborne Auxiliary Power |
| 52 | Doors |
| 53 | Fuselage |
| 54 | Nacelles / Pylons |
| 55 | Stabilizers |
| 56 | Windows |
| 57 | Wings |
| 71 | Power Plant |
| 72 | Engine |
| 73 | Engine, Fuel and Control |
| 74 | Ignition |
| 75 | Bleed Air |
| 76 | Engine Controls |
| 77 | Engine Indicating |
| 78 | Exhaust |
| 79 | Oil |
| 80 | Starting |
The full list is longer. It also includes chapters such as 25 Equipment and Furnishings, 38 Water and Waste, 44 Cabin Systems, 45 Central Maintenance System and 51 Standard Practices and Structures. Use the full ATA or iSpec 2200 list for the complete set.
How the numbers work in a real manual
A reference such as 29-xx-xx tells you three things in order: the chapter (29, Hydraulic Power), then the section inside that system, then the subject inside that section. You do not need to memorise every section. You need to recognise the chapter, so you know which system you are in the moment you open a task.
Chapter numbers show up everywhere. Task cards, parts lists, wiring diagrams, fault isolation steps and service bulletins all use them. If you want to see how each manual type uses them, read our guide to AMM, IPC, CMM, WDM and SRM.
Why this matters for a Tech Pub career
Technical authors write, update and check content that is filed by ATA chapter. Job posts for authors, illustrators and data engineers often list ATA 100 or iSpec 2200 as a required skill. We break down what those listings ask for in our guide to S1000D and tech pub skills.
If you already know that 32 is Landing Gear and 24 is Electrical Power, you are a step ahead in every interview and every first week on the job.
A simple way to learn them
- Start with the groups. General, systems, structure, power plant.
- Learn 15 chapters first. 21, 24, 27, 28, 29, 32, 34, 49, 52, 57, 71, 72, 73, 79 and 80 cover most of what you will see.
- Tie each number to a part you can picture. 32 is the wheels. 57 is the wing. 72 is the engine.
- Open a real manual and look at how a task is numbered.
Frequently asked questions
What does ATA stand for?
Air Transport Association. Its chapter numbering is used across commercial aviation documentation.
Is ATA 100 still used?
The ATA 100 specification has been superseded by iSpec 2200, but the numbering approach continues and people still use the term ATA 100.
What is ATA chapter 29?
Hydraulic Power.
What is ATA chapter 32?
Landing Gear.
What is ATA chapter 72?
Engine. Chapters 71 to 80 cover the power plant and its related systems.
Do I need to memorise all the chapters?
No. Know the main ones well and learn the rest by using real manuals.
Who can join GLOINNT’s Aerospace Technical Publications Training?
The program is open to BE/BTech graduates in Aeronautical or Aerospace Engineering, and to AME holders. See eligibility, batch dates and how to apply.
Want to learn this on real manuals?
GLOINNT’s Aerospace Technical Publications Training in Bengaluru covers the documentation standards behind the numbers, with hands-on practice. If you hold a BE/BTech in Aeronautical or Aerospace Engineering, or an AME licence, you can enrol here or call +91 96062 64161.
